System 3 is a pivoting door hinge with a 360˚ range of movement from FritsJurgens. The door only needs a light touch to start its movement and will continue to rotate by itself due to the patented spring construction.
- Hold positions at 0˚, 90˚, 180˚ and 270˚
- Patented spring system
FritsJurgens System 3 pivot hinge system has three functions:
- Hold positions (one at every quarter circle)
The spring-loaded door turns from each 45º in both directions and stops in the desired direction. Thanks to precise damping the door comes to rest in the hold position after two movements.
- No structural elements in floor and ceiling
- Quick and simple to install
- For new and existing situations
- Easily adjustable with the door in place
- Suitable for timber, steel, framed glass, and massive clad doors
- For double action doors
- For internal and external doors
|Maximum load-bearing capacity ||500 kg |
|Minimum door thickness ||40 mm |
|Minimum dimensions around the door for fitting || |
minimum 4 mm, maximum 10 mm
|Hold Positions ||0º, 90º, 180º en 270º |
|Minimum Distance from the pivot point to the side of the door ||91 mm. |
FritsJurgens System3 is suitable for fire-resistant doors, soundproof doors, doors with draught-excluding, windproof and waterproof profiles, and burglar-resistant doors.
Delivered as a complete set Including:
- CEILING PLATE
A stainless-steel ceiling plate is fitted in the ceiling. The pin of the top pivot fits seamlessly into the hole in the ceiling plate.
- TOP PIVOT
The top pivot is integrated into the top of the door and uses a so-called pin/hole connection. The pin is fixed to the top pivot and drops into the hole in the ceiling plate when this is turned.
- SYSTEM 3
System 3 pivot hinge is integrated into the lower part of the door. The oval base of the pivot hinge system is inserted into the slot in the floor plate.
- FLOOR PLATE
A stainless-steel floor plate with an oval recess is fitted to the floor. The base of the pivot hinge fits seamlessly into the recess in the floor plate.