-
Architects: Architectonica Procreate
- Area: 260 m²
- Year: 2019
-
Photographs:Noaidwin Studio
-
Manufacturers: Architectonica, Hindware, Jaquar, Mitsubishi Electric, Norisys, Philips, Sun Company, Ultratech, cera
-
Lead Architect: Poonam Jolly
-
Architectural Design: Varsha Sujit
Text description provided by the architects. Boathouse is born out of a desire to provide sustainable solutions to everyday activities for everyone. Placed in a green, serene zone on the outskirts of the city, it was imperative that the design reacted to its surroundings. The first move, therefore, was not to disturb the natural slope on the site. A basement floor created at -1200 level nullified the need to do any filling at all. The basement was planned to be less than the upper floors to have more garden space. A conscious decision was taken to leave the ground as is, with no paving except for pathways having continuous movement.
Concrete as a material was selected to support the devious cantilever slab, and a shear wall system came up. Every material used in the Boathouse is selected only because it is sustainable, inexpensive and the potential of each material is exploited to its breaking point. A combination of recycled timber has been used with exposed fair-faced concrete and RCC and steel support system. The use of factory-made tiles is replaced with terrazzo and oxide flooring, and other finishing materials like laminates are avoided to help reduce the carbon footprint. All finishes are handmade, to encourage employees to skilled and unskilled labor.
The flooring near the pool and on-ramp is made of props cut to 75mm and cast in concrete. The formwork rafters are used as a framework for the partitions and as seats in the pool area. The wooden battens reused four times in formwork were further cut into 10mm thick strips and used as screens on the partitions in bathrooms and other areas. The good pieces which could be salvaged as a whole were used for flooring in the bedroom.
The next level of optimization was sought by dividing the functions into two clear zones- Living and Services, creating an in-between space. The courtyard communicates horizontally and vertically- physically, visually, and sensually. It becomes a place to travel within the building and also where complete transparency is observed. With welded mesh steel screens on either side, the court is open to elements and cools the air that passes through it. This void is the heart of the house where stale energy is ejected and fresh one pumped in constantly. Most rooms have openings on three sides to allow for better ventilation. To avoid additional sunk slabs in the service block, the entire floor is made up of mild steel pipes, making all plumbing suspended.
All non-structural walls are partitions or full gazing to ensure maximum daylight into the house, cutting electricity costs. Long horizontal slits are cut in the western wall to minimize glare and maximum sunlight throughout the day. Thermal energy is further optimized by the use of roof gardens, having earth, water, and plants.
The bio pool, built on the concept of aquaponics, is a space to swim amidst nature. Its delicate ecosystem consists of aquatic plants, fishes, frogs, turtles, and migratory birds. Architecture is a silent witness to the play of this life.
