UseExterior metal cladding
ApplicationsCommercial, residential, cultural, public, industrial, hospitality
CharacteristicsSystem approved by building inspection authorities for improved reliability, extensive range of products and matching roof drainage products from a single source
SizesStandard panel width approx. 530 mm (coil width 600 mm) | Common panel widths 400 mm to 600 mm | Metal thicknesses 0.7 mm/0.8 mm | Normal panel length up to 10 m | Deliverable lengths max. 7 m
CertificationCradle to Cradle Certified™
RHEINZINK angled standing seam is a metal roof system made from titanium zinc. The long-lasting system features striking seams for roof inclinations from 25°. Around since the beginning of the 20th century, angled standing seams are a particularly useful roofing system on roof inclinations of more than 25° or 35° in regions with heavy snowfall.
*Illustrations shown throughout may not represent all components necessary to meet building codes.
RHEINZINK angled standing seam systems are used for roofs and façade cladding and for cladding small surfaces such as fascias, upstands etc. They are set apart by their particularly low material stresses. In contrast to double standing seams, only one side is closed using a machine or by hand. The angled standing seam is produced using roll formers or bending brakes. Tapered areas and concave and convex rounded surfaces can be covered and clad using these elements.
- Strikingly dynamic structure for small and large surfaces
- Individual adaptation options for tapered, concave and convex rounded surfaces
- Individual elements can be installed vertically, diagonally or horizontally and allow interesting and aesthetically pleasing roof surfaces to be planned
- Matching system technology facilitates rapid assembly