Desk - ateliertisch t-7060 | Horgenglarus AG
  1. ArchDaily
  2. Products
  3. Desks
  4. Desk - ateliertisch t-7060

Desk - ateliertisch t-7060 | Horgenglarus AG

Share
  • Use

    Interior furniture
  • Applications

    Residential, hospitality
  • Characteristics

    Veneer table top, 5cm high solid edges on counterfeit, removable black matte metal frame
  • Sizes

    Leg width 75 cm; table height 74 cm

Ask for more information / Quote

You have to type a valid name
You have to type a valid email format
You have to type a valid phone number
You have to type a message longer than 10 characters
I want to receive a sample
By sending this quote request you agree to the Terms of use and the Privacy Policy.

More about this product

The French word "atelier" means "workshop" and is, according to Wikipedia, "an artist’s workplace". One thing is for sure: The Ateliertisch desk table lives up to its name. Standing in the middle of the room you could approach it from every side to work on it. Swiss architect and designer Hans Bellmann devised the Ateliertisch for Horgenglarus back in 1953. After many decades it is now returning to the Glarner Manufaktur’s product line.

The Ateliertisch was already included in Horgenglarus catalogs in the 50s and 60s, but it seems that the delicate design was a bit too vanguard and futuristic for the time despite how practical the desk table is. Bellmann had devised the design with the objective of making it a very light table. In addition, another fundamental idea of this former Bauhaus student takes effect here: The table had to be very easy to take apart. If you are moving house and need to disassemble and reassemble it, this table will not mind at all, thanks to Bellmann’s typical construction method and the high-quality attachment.

Compared to its draft from 1953, the final product hardly changed. The solid wood frame interlocks in the corners with an offset on both sides to create the so-called counterfeit, making the table aesthetically pleasing and the corners and tabletop more robust. The inserted tabletop is slightly thinner than the frame to make room for the cross bracing for the legs. The Ateliertisch maintains its lightweight character without losing any of its robustness.

The tabletop stands on matte black steel tube legs, flaring towards the floor. Two legs each meet on a metal plate on the underside of the table. The two metal plates have four screws each for attaching them to the solid wood cross-bracing on the underside of the table. So the entire table has only eight screws, making it very easy to release the tabletop from the frame. In particular, in times of great mobility, the Ateliertisch is an ideal life-long companion.

Finishes

  • Oak
  • Walnut
  • Beech
  • Natural
  • Black
  • Stained

Dimensions

The table dimensions are aligned with Le Corbusier’s Modulor proportional system based on human body dimensions. Therefore, the table is available in the following dimensions:

  • Lengths of 183 cm, 226 cm and 296 cm
  • Widths of 86 cm and 113 cm (the latter only for the 296 cm table)
  • The table height is 75 cm

The Swiss ten frank note shows a portrait of Le Corbusier and his Modulor dimensions. So if you want to check the dimensions of your Ateliertisch, just have a look at your Swiss money.

Ask for more information / Quote

Ask for more information / Quote

You have to type a valid name
You have to type a valid email format
You have to type a valid phone number
You have to type a message longer than 10 characters
I want to receive a sample
By sending this quote request you agree to the Terms of use and the Privacy Policy.

Related Products

Desk Partition - BuzziTripl Wrap Desk

Buzzispace

Table - podia t-1806

Horgenglarus AG
Get a Quote