CharacteristicsLightweight, 360° movement, modular, customizable,
SizesWidth: 300, 400, 500 mm | Height: from 1900 mm to 3500 mm
Linvisibile Brezza Zefiro System is a system of flanked vertical pivot panels. Used to compartmentalize environments, they are born from the concept of “screens”. The modularity of the panel system offers design freedom, with choices for the number of doors and the finishes applicable to them. The customer can specify the number of pivoting panels, depending on the space they wish to compartmentalize and, also, can choose whether to apply different finishes on the facades or to compose an a-symmetrical system of panels.
Zefiro System wood-based panel version
The wood panels are composed of 50 mm thick hollow-core panels (honeycomb) made of perimetric hardwood and polished MDF sides. Panel without rebate to allow the leaf’s complete rotation, predisposed for housing the lower and upper pins.
Available in finishes: base coat, natural and veneered wood, lacquered (also molded panel). Class E1, low formaldehyde emission.
Zefiro System framed version
Composed of a perimetric frame in extruded aluminum 60 mm thick, which can be anodized or painted, and allows the insertion of different finishes or combinations of finishes: retro lacquered glass, special glass, mirror, leather, metal, ceramic, Alcantara®, etc.
The customer can further customize the panels by requesting only the disassembled frame, into which another finish can be inserted.
Light and easy to handle, the Linvisible pivoting panels are installed in-line and can be realized from floor to ceiling, or at a predefined height, rotating on a central pivot that allows a 360° movement, without a defined “resting” position. A reduced frame offers the possibility of creating systems with a high number of panels, and can be realized in two alternative configurations:
- Upper Beam
This guarantees the perfect anchoring of aluminum to the ceiling (masonry and plasterboard), supplied in parts to facilitate its transportation and to be assembled via joints before ceiling installation. Paintable with good quality water-based paints, enamels, etc.
For the positioning of the pins directly to the finished ceiling.
- On both versions; the possibility of finishes with see-through motifs (after previous evaluation by the technical office).
- Available in masonry or plasterboard versions
- Aluminum cross-piece divided into several parts to be joined on site
- Upper 10 mm
- Lower: 9 mm
- Between the panels: 10 mm
- If a wall is present: 5 mm
- Maximum composition: not foreseen (subject to verification of site conditions)
- It is possible to supply panels of different widths in the same system