Pavilion / EmTech (AA) + ETH

Courtesy of EmTech (AA) + ETH

Out of a collaboration between the Emergent Technologies and Design program (EmTech) of the Architectural Association (AA), London, and the Chair of Structural Design at the Swiss Federal Institute of Technology (ETH), Zurich, a temporary light timber construction has been designed that functions as sun shading for parts of the grand stairs in front of the architecture department of the ETH. Based on bending behavior under the self-weight of over-sized sheets of plywood of up to 11 x 2.5 m, the design activates the material properties as the defining element in the transfer of forces. More images and architects’ description after the break.

The exploration of the sheet material and the manipulation of its bending properties by controlling the number of layers of ply and the fiber direction of these layers was the starting point of the design process. The precise geometry of the bending curve emerged out of the distribution of matter, the hierarchy within plywood as composite material and given load conditions.

Courtesy of EmTech (AA) + ETH

Based on a systematic investigation into the defining parameters, sheets of 18 mm thickness with fibers mainly in longitudinal direction have been used for the pavilion. Cuts within the sheets influence the bending resistance of the sheets, enable a larger spatial enclosure and reduced wind load acting upon the structure, and additionally produces a shadow pattern on the stairs that are used as seating area during summer time. Varying the length of the sheets generates small variations of the bending curve that have been utilized for the overlapping and interlocking of adjacent elements resulting in a system of self-stabilizing vaults. The vaults are cross-braced by a sequence of cables. These cables distribute all other load conditions evenly within the edge strips, and so reduce additional deformation of the arched form to a minimum.

Courtesy of EmTech (AA) + ETH

The design refinement as well as details of the construction and fabrication process of the pavilion have been worked out by a design team of EmTech-students. The initial design idea derived from the winning entry of a competition team during an internal design competition within EmTech. In addition, the work of the design team has been informed by material test and design studies conducted during a workshop of all EmTech students at the ETH.

Courtesy of EmTech (AA) + ETH

In general, precedents to this field of work commence with the work of Alvar Aalto and Charles Eames in plywood, and the techniques of scoring, cutting and bending to achieve curvature have been established in a variety of materials in jewelry design, surface ornamentation, paper and other craft practices, as well as in airplanes and boats. Recent contributions include Skylar Tibbits’ Surface Ornamentation at the MIT – Massachusetts Institute of Technology (2008), and The Probotics of the AA DRL – Architectural Association Design Research Laboratory (2010).

Courtesy of EmTech (AA) + ETH

Location: Zurich, Switzerland Project Coordinator: Toni Kotnik (DARCH, ETH Zurich; EmTech, AA London) Academic Supervisors: Toni Kotnik (DARCH, ETH Zurich; EmTech, AA London), Michael Weinstock (EmTech, AA London), George Jeronimidis (EmTech, AA London), Wolf Mangeldorf (Buro Happold, London) Competition Team: Norman Hack, Pierluigi D’Acunto, Camila Rock De Luigi, Paula Velasco, Shibo Ren, Shanky Jain, Alkistis Karakosta (EmTech, AA London) Design Team: Norman Hack, Pierluigi D’Acunto, Camila Rock De Luigi, Paula Velasco (EmTech, AA London) Project Management: Darrick Borowski (EmTech, AA London), Özgür Keles (DARCH, ETH Zurich) Structural Analysis: Pierluigi D’Acunto, Shibo Ren (EmTech, AA London) Structural Consulting: Luke Epp (Buro Happold, London), Joseph Schwartz (DARCH, ETH Zurich) Shading Analysis: Yassaman Mousavi (EmTech, AA London) Fabrication Team: Fatima Nasseri, Yassaman Mousavi, Paula Velasco, Camila Rock De Luigi, Shanky Jain, Sherwood Wang, Nicolás Villegas Giorgi, Norman Hack, Pierluigi D’Acunto, Gabriel Ivorra, Sebastian Partowidjojo (EmTech, AA London) Steel Work: Peter Jenni (Metal Workshop D-BAUG, ETH Zurich) Wood Work: Oliver Zgraggen & Paul Fischlin (Carpentry, ETH Zurich) Material: KERTO Q LVL Standard not sanded 18mm (Finnforest Switzerland, Zurich); INOX Stranded Wire 4mm (Jakob AG, Trubschachen)

Image gallery

See allShow less
About this author
Cite: Alison Furuto. "Pavilion / EmTech (AA) + ETH" 31 Mar 2012. ArchDaily. Accessed . <https://www.archdaily.com/221650/pavilion-emtech-aa-eth> ISSN 0719-8884

You've started following your first account!

Did you know?

You'll now receive updates based on what you follow! Personalize your stream and start following your favorite authors, offices and users.