Vertical Platform - S11 Plus Platform Lift | Vimec

Vimec offers state-of-the-art products with a focus on individual character and sustainability. Vimec presents the S11 Plus Platform Lift, designed to guarantee vertical lifting for every requirement. This product is capable of overcoming height gaps of up to 2.99 meters.

Today’s architects, engineers, and interior designers increasingly recommend vertical lifting systems (handicapped platforms, wheelchair platforms) like the S11 Plus Platform Lift from Vimec for overcoming existing architectural barriers.

Materials

The standard system comes with a platform covered in non-slip diamond tread aluminum sheet metal, protected by two walls (column side covered with a standard blind RAL 7040 color sheet metal panel, and external side covered with charcoal colored polycarbonate. The standard-height floor gate is covered with charcoal-colored polycarbonate.

The floor 0 button panel is always furnished along with the system in the wireless configuration. The open shaft versions always come furnished with a manual onboard gate covered with charcoal-colored polycarbonate, and photocells on the exit side.

Installation

The system can be installed both indoors and outdoors, in three different configurations:

• Free-standing
• Masonry shaft
• Shaft with steel protection

Characteristics

• Load capacity: up to 400 Kg
• Distance: 2 stops/ 2.99 m
• Drive mechanism: with electric motor and worm screw
• Speed
  • 0.05 m/sec (Versions 1.100, 1.600, 2.100)
  • 0.10 m/sec (Versions 2.600, 2.990)
• Motor and power supply: Motor positioned inside the shaft, with the following specifications:
• Power rating: 2.2 Kw; single phase for versions 1.100, 1.600, 2.100 and three-phase for versions 2.600 and 2.990;
• Line voltage: 230V ± 5%, AC – 50Hz single phase;
• Auxiliary power supply voltage: 24V DC;
• Power supply Motor with inverter (optional for versions 1.100, 1.600, 2.100)
• Attachments to be chosen by the customer:
  • Pre-walled anchoring brackets, or alternatively
  • Rear-wall mounted with mechanical anchors
  • Rear-wall mounted with chemical or hollow wall anchors with metallic support structure/protection
• Guide rails made from processed T70-1A section