The in-house research and development team at Karcher Design creates stainless steel fittings alongside recognized designers. The designs always carry the Karcher Design trademark fixing assembly.
- A mortise lock that enables the interior doors to be locked by simply pressing the pin mounted on the door handle rosette
- When the door is locked, the outside door handle can be operated, but without affecting the latch. The outside door handle runs ‘into space‘ and the door remains locked
- When leaving the locked room, all you need to do is press the door handle. It is not necessary to pull out the locking pin
- Inadvertent locking out is not possible, as every latch adjustment that is mandatory when the door slams into the door frame sets the lock in an open state.
- No additional key or bathroom rosette necessary
- Emergency opening provided on the outside
Technical Data: Mortise Lock
- External dimensions of the lock according to the DIN 18251 standard
- 20mm stainless steel lock faceplate
- Backset: 55mm
- Integrated coupling
- Split square nut: 8mm
- 8mm split square spindle
- Tested for at least 100,000 cycles
- Compatible only with the supplied Karcher door handle rosette
Technical Data: Door Handle Set
- Three-part Karcher stainless steel rosette to clip in
- The outside of the door handle set is delivered completely pre-assembled
- Inside and outside are mounted continuously with M4 screws
- The door handle support plates are on the mounting plates with two M3 screws
- Secured => this allows tensile forces of at least 1800 N (approx. 180kg) despite the split
- Square pin can be applied
- Use of all Karcher door handle models (except D86-Tower and ED96-Kent) possible
