Europerfil develops and manufactures metal profiles, sandwich panels, and construction systems for building envelopes. The company offers a wide range of steel and metal cladding solutions designed for use across diverse building typologies, focusing on performance, durability, and architectural integration.
Europerfil presents its selection of panel accessories and complements, a range of components designed to support the installation, performance, and protection of metal sandwich panel systems used in roofs and façades. These accessories facilitate panel assembly, improve sealing and weather protection, and enable the integration of complementary systems such as photovoltaic installations.
Available Accessories & Complements
Delfos Clean Overlap
Delfos Clean Overlap is designed to facilitate the installation of sandwich panels when transverse overlaps are required. The system is manufactured with the overlap area prepared at the factory, eliminating the need to remove foam on site.
By supplying the Delfos roof sandwich panels without the bottom sheet and foam in the overlap zone, the system simplifies installation and reduces on-site work during roof cladding assembly.
Delfos PV Clamp
The Delfos PV Clamp is an accessory designed to fasten rooftop photovoltaic systems to sandwich panels without drilling the panels. It is specifically developed for use with Delfos 1150 and Delfos 1000 roof sandwich panels.
The clamp is coupled to the tongue-and-groove joint of the sandwich panel, allowing photovoltaic systems to be installed on the roof while preserving the integrity of the sandwich panel.
Filler Block
A filler block is an accessory used in metal construction systems, particularly in profiled steel roofs and façades, to fill the voids created by the corrugated or ribbed geometry of the roof and wall metal profiles.
It is typically used to:
- Seal gaps between metal sheets and supporting elements
- Prevent the entrance of water, dust, insects, and birds
- Improve airtightness and thermal performance
- Provide continuous support for fixings or additional systems
Filler blocks are manufactured to match the geometry of the metal panel profile and are made of EPDM.
| | | |
| Atenea | Euroform 34.1 | Eurodesign 51/345 |
Metal Cover Plate for Sandwich Panels
The metal cover plate for sandwich panels is designed to protect the exposed foam core of the panel after installation on the roof. The element covers the exposed area at panel joints or edges, contributing to the protection of the panel core and the durability of the roof assembly.
Sandwich Panel Gasket Seal
Sandwich panel gasket seals are used at panel joints to contribute to façade watertightness and airtightness. They also allow for the absorption of structural movements and thermal expansion while protecting the foam core of the panel.
Two types of gasket seals are available, depending on the material:
- EPDM seals, used for longitudinal and transverse joints
| |
| EPDM Horizontal Gasket Seal for Etna Advance |
| | Joint T Etna Semi Advance |
| | |
| Aluminium joint | Steel joint |
- Metal cover plate, used for transverse joints and manufactured in steel or extruded aluminum
| | | |
| Etna Advance | Y EPDM gasket seal |
| | | |
| Y filled EPDM gasket seal | Horizontal EPDM gasket seal | EPDM transverse gasket seal for Etna Advance |
Explore Europerfil's product catalog or visit their website for more information.
