MDF Board - Fibrofit | Unilin

Unilin's raw MDF panels are suitable for many uses: as a strong basis for your interior project and finishes, if desired, by painting, lacquering, laminating, or gluing with HPL or wood veneer. Choose from a range of sustainably produced MDF in a standard version or with (a combination of) unique properties: fire-retardant, moisture-resistant, or with reduced formaldehyde.

This board has low formaldehyde emission (E1 class). Fibrofit is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.

Fibrofit

MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrofit can be used for non-loading bearing applications in dry conditions.

Fibrofit Paint

MDF board (L-MDF according EN 622-5) with a high-quality white paint grade film on both sides, suitable for an excellent and cost and time-saving paint finish. Fibrofit Paint can be used for non-loading bearing applications in dry conditions.

Fibrofit MR

Moisture-resistant MDF board (L-MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is colored green inside. Fibrofit MR can be used for non-loading bearing applications in humid conditions.