MDF Board - Fibralux | Unilin

Unilin's raw MDF panels are suitable for many uses: use them as a strong basis for your interior project and finish, if desired, by painting, lacquering, laminating or gluing with HPL or wood veneer. Choose from a range of sustainably produced MDF in a standard version or with (a combination of) unique properties: fire-retardant, moisture-resistant, or with reduced formaldehyde.

Fibralux panels are made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.

Fibralux

High-density MDF board with a hard, fine and smoothly sanded surface. Fibralux can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Black High Gloss

High-density MDF board, colored black inside, with a transparent “high gloss” finish on both sides. The small wood fibers remain visible on the panel’s surface, emphasizing the natural origin of the product. Fibralux MR Black High Gloss can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). Matching ABS edging tape is available.

Fibralux FR Wheelmark

High-density, fire retardant MDF board with a hard, fine, and smoothly sanded surface. For easy identification, the panel is colored red inside. Fibralux FR Wheelmark can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux FR Wheelmark is hardly flammable (European fire reaction classification B), has a significantly delayed combustion, and does not contribute to flame spread. Fibralux FR Wheelmark is B-s1-d0 certified (EN 13501-1). For the thickness range from 12 to 30 mm, Fibralux FR Wheelmark also meets Class 1/Class A as set by ASTM E84.

Fibralux MR NAF

High-density, moisture-resistant MDF board with a hard, fine, and smoothly sanded surface. Fibralux MR NAF is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibralux MR NAF can be used for load-bearing applications in humid conditions. This board is approved by the Air Resources Board (ARB) as a no-added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM ‘Airborne Toxic Control Measure’).

Fibralux NAF

High-density MDF board with a hard, fine, and smoothly sanded surface. Fibralux NAF is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibralux NAF can be used for load-bearing applications in dry conditions. This board is approved by the Air Resource Board (ARB) as a no-added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM / Airborne Toxic Control Measure).

Fibralux MR Black Gloss

High density, moisture resistant MDF board with a hard, fine, and smoothly sanded surface. The panel is colored black inside and finished with a transparent, glossy lacquer on both sides. Fibralux MR Black Gloss can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Black

High density, moisture resistant MDF board with a hard, fine, and smoothly sanded surface. The panel is colored black inside. Fibralux MR Black can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Black Satin

High-density MDF board, colored black inside, with a transparent “silk gloss” finishing on both sides. The small wood fibres remain visible on the panel’s surface, emphasizing the natural origin of the product. Fibralux MR Black Satin can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux Plus

High-density MDF board with a hard, fine, and smoothly sanded surface. Fibralux Plus can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI).

UNILIN Evola-Fibralux NAF

Melamine-faced structural MDF board with no added formaldehyde. UNILIN Evola-Fibralux NAF is characterized by extremely low-formaldehyde emissions (no added formaldehyde-based resins). UNILIN Evola-Fibralux NAF can be used for load-bearing applications in dry conditions.

Fibralux Pro P Uncolored

High-quality MDF board with a hard, fine, and smoothly sanded surface. Fibralux Pro P Uncolored can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Uncoloured

High density, moisture resistant MDF board with a hard, fine, and smoothly sanded surface. Fibralux MR Uncoloured can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux Pro

High-quality MDF board with a hard, fine, and smoothly sanded surface. Fibralux Pro can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Black Super Matt

High-density MDF board, colored black inside, with a transparent “super matt” finish on both sides. The coating has anti-fingerprint properties and is very pleasant to touch. Moreover, the small wood fibers remain visible on the panel’s surface, emphasizing the natural origin of the product. Fibralux MR Black Super Matt can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). Matching ABS edging tape is available.

Fibralux FR Black

High-density, fire retardant MDF board with a hard, fine, and smoothly sanded surface. The panel is colored black inside. Fibralux FR Black can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux FR Black is hardly flammable (European fire reaction classification B), has a significantly delayed combustion, and does not contribute to flame spread. For thickness from 9 to 15,9 mm, Fibralux FR Black is B-s2-d0 certified (EN 13501-1). For thickness from 16 to 19 mm, Fibralux FR is B-s1-d0 certified (EN 13501-1).

Fibralux MR

High-density, moisture-resistant MDF board with a hard, fine, and smoothly sanded surface. For easy identification, the panel is colored green inside. Fibralux MR can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux MR Grey

High-density, moisture-resistant MDF board with a hard, fine, and smoothly sanded surface. The panel is colored grey inside. Fibralux MR Grey can be used for load-bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).

Fibralux FR

High-density, fire retardant MDF board with a hard, fine, and smoothly sanded surface. For easy identification, the panel is colored red inside. Fibralux FR can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux FR is hardly flammable (European fire reaction classification B), has a significantly delayed combustion, and does not contribute to flame spread. For thicknesses from 6 to 11,9 mm, Fibralux FR is B-s2-d0 certified (EN 13501-1). For thicknesses from 12 to 30 mm, Fibralux FR is B-s1-d0 certified (EN 13501-1). For the thickness range from 6 to 30 mm, Fibralux FR also meets Class 1/Class A as set by ASTM E84.

Fibralux FR Uncoloured

High-density, fire retardant MDF board with a hard, fine, and smoothly sanded surface. Fibralux FR Uncoloured can be used for load-bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux FR Uncoloured is hardly flammable (European fire reaction classification B), has a significantly delayed combustion, and does not contribute to flame spread. For thicknesses from 6 to 11,9 mm, MDF Fibralux FR Uncoloured is B-s2-d0 certified (EN 13501-1). For thickness from 12 to 30 mm it is B-s1-d0 certified (EN 13501-1). For the thickness range from 6 to 30 mm, it meets Class 1/Class A as set by ASTM E84.

Fibralux MR FR NAF

High-density, moisture resistant & fire retardant MDF board, with a hard, fine, and smoothly sanded surface. Fibralux MR FR NAF is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins). It can be used for non-load bearing applications in humid conditions. This board is approved by the Air Resource Board (ARB) as a no-added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM (Airborne Toxic Control Measure). Fibralux MR FR NAF is hardly flammable (ASTM E84 Class A/Class 1 rating for thicknesses 9 - 30 mm and European fire reaction classification B), has a significantly delayed combustion, and does not contribute to flame spread. For all available thicknesses (from 6 to 30 mm), Fibralux MR FR NAF is B-s1-d0 certified (EN 13501-1).