MDF Board - Fibromax | Unilin

Unilin's raw MDFs are suitable for many uses: use them as a strong basis for your interior project and finish, if desired, by painting, lacquering, laminating or gluing with HPL or wood veneer. Choose from a range of sustainably produced MDF in a standard version or with (a combination of) unique properties: fire-retardant, moisture-resistant, or with reduced formaldehyde.

All Fibromax panels are made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.

Fibromax

High-density MDF board (MDF according EN 622-5) with a hard, fine, and smoothly sanded surface. Fibromax can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class).

Fibromax MR

High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine, and smoothly sanded surface. For easy identification, the panel is colored green inside. Fibromax MR can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class).

Fibromax MR Uncoloured

High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine, and smoothly sanded surface. Fibromax MR Uncoloured can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class).

Fibromax Pro FI LF+

High quality MDF board (L-MDF according EN 622-5) with a hard, fine, and smoothly sanded surface. Fibromax Pro FI LF+ can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany.

Fibromax MR Paint

High density, moisture resistant MDF board (MDF.H according EN 622-5) with a high-quality white paint grade film on both sides, suitable for an excellent cost and time-saving paint finish. For easy identification, the panel is colored green inside. Fibromax MR Paint can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class).

Fibromax Pro

High-quality MDF board (L-MDF according EN 622-5) with a hard, fine, and smoothly sanded surface. Fibromax Pro can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class).

Fibromax Paint

High-density MDF board (MDF according EN 622-5) with a high-quality white paint grade film on both sides, suitable for an excellent and cost and time-saving paint finish. Fibromax Paint can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class).