Unilin's raw MDF panels are suitable for many uses: use them as a strong basis for your interior project and finish, if desired, by painting, lacquering, laminating or gluing with HPL or wood veneer. Choose from a range of sustainably produced MDF in a standard version or with (a combination of) unique properties: fire-retardant, moisture-resistant, or with reduced formaldehyde.
Fibrabel range is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Products
- Fibrabel
MDF board with a hard, fine and smoothly sanded surface. Fibrabel can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel Black - Core Coloured MDF
MDF board with a hard, fine and smoothly sanded surface. The panel is colored black inside and can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel Black LF+ - Core Coloured MDF
MDF board with a hard, fine and smoothly sanded surface. The panel is colored black inside and can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany. It also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel ExtremeLight
Ultra-lightweight MDF board with a hard, fine, and smoothly sanded surface. This panel can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). - Fibrabel FR
Fire retardant MDF board with a hard, fine and smoothly sanded surface. For easy identification, the panel is colored red inside. It can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibrabel FR is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For thickness from 10 to 14,9 mm, Fibrabel FR is B-s2-d0 certified (EN 13501-1). For thickness from 15 to 25 mm, Fibrabel FR is B-s1-d0 certified (EN 13501-1). For the thickness range from 10 to 30 mm, Fibrabel FR also meets Class 1/Class A as set by ASTM E84. - Fibrabel FR Uncoloured
Fire retardant MDF board with a hard, fine and smoothly sanded surface. Fibrabel FR Uncoloured can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibrabel FR Uncoloured is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For thickness from 10 to 14,9 mm, Fibrabel FR Uncoloured is B-s2-d0 certified (EN 13501-1). For thickness from 15 to 25 mm, Fibrabel FR Uncoloured is B-s1-d0 certified (EN 13501-1). For the thickness range from 10 to 30 mm, Fibrabel FR Uncoloured also meets Class 1/Class A as set by ASTM E84. - Fibrabel FR Wheelmark
Fire retardant MDF board with a hard, fine and smoothly sanded surface. For easy identification, the panel is colored red inside. It can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). It is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. The panel is B-s1-d0 certified (EN 13501-1). For thickness, 15 to 25 mm, is labeled with the Mark of Conformity(Wheelmark). For the thickness range from 15 to 30 mm, it also meets Class 1/Class A as set by ASTM E84. - Fibrabel LF+
MDF board with a hard, fine, and smoothly sanded surface. This panel can be used for non-load bearing applications in dry conditions. It has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany. Fibrabel LF+ also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel MR
Moisture-resistant MDF board with a hard, fine and smoothly sanded surface. For easy identification, the panel is colored green inside. It can be used for non-load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel MR FR NAF
Moisture-resistant & fire-retardant MDF board, with a hard, fine, and smoothly sanded surface. It is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins) and can be used for non-load bearing applications in humid conditions. This board is approved by the by Air Resources Board (ARB) as a no-added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM Airborne Toxic Control Measure. It is hardly flammable (ASTM E84 Class A/Class 1 rating for thicknesses 12 - 25 mm and European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. - Fibrabel MR NAF MR50
Moisture-resistant MDF board with a hard, fine and smoothly sanded surface. It is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins). It can be used for non-load bearing applications in humid conditions. The product meets the criteria required for the MR50 / grade 115 designation (ANSI A208.2-2016). This board is approved by the Air Resources Board (ARB) as a no-added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM ‘Airborne Toxic Control Measure’). - Fibrabel MR Uncolored
Moisture-resistant MDF board with a hard, fine and smoothly sanded surface. It can be used for non-load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI).
- Fibrabel Ultralight
Ultra-lightweight MDF board with a hard, fine and smoothly sanded surface. It can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). - Fibrabel NAF
MDF board with a hard, fine and smoothly sanded surface. It is characterized by extremely low formaldehyde emissions (no added formaldehyde-based resins) and can be used for non-load bearing applications in dry conditions. This board is approved by the Air Resources Board (ARB) as a no added formaldehyde-based resin (NAF) MDF board (section 93120.3 of the ATCM / Airborne Toxic Control Measure).
