The DesignerVeneer range from ForestOne offers a decorative veneer board using timber in its most economical and environmentally sustainable form. All veneers are reconstructed from a range of timber species sourced from responsibly managed forests.
Ideal for use as doors, partitions, and other vertical surfaces, the DesignerVeneer range is suitable for both residential and commercial applications.
DesignerVeneer uses an E0 MDF substrate. E0 is a low formaldehyde emitting product that has a formaldehyde emission of less than 0.5mg/L, which is lower than the current Australian standard LPM board.
Like other dyed products such as fabric, it is possible that DesignerVeneer colors may vary slightly from batch to batch between 5-10%. To ensure the best results, all veneer for a project should be ordered at the same time and the same coating and processing systems used if required.
DesignerVeneer is a specially selected color palette of 13 reconstituted veneers drawing inspiration from the Australian outback.
DesignerVeneer is available with a prefinished surface reducing onsite installation time, or with a natural timber surface for your preferred finishing product.
DesignerVeneer is manufactured using superior dyes that are resistant to UV rays. Just as natural timber veneers will tend to change color in the presence of light, DesignerVeneer may also be affected. This is part of a natural process and not a defect in the veneers. A UV coating is recommended to help minimize color changes over time.
Matching edging is available for all colors in unglued rolls of 50LM x 22mm in unfinished raw veneer or ABS Prefinished Edging in Crossband and Longband for grain continuity.
