Terrazzo is Back: Production, Installation, and Samples in Architecture

Terrazzo is Back: Production, Installation, and Samples in Architecture
Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 6 of 24
Focal Length / RENESA Architecture Design Interiors Studio. Image © Suryan//Dang

Terrazzo is made by combining a cement base (sand, water, and cement) with a mixture of ground minerals - like marble, granite, and quartz - and can be applied to almost any surface, vertical or horizontal. The technique, produced using a completely hand-crafted method, was used worldwide in the construction of modern buildings and is noted for its durability, resistance (to water and abrasion), and easy maintenance. This made it a go-to material in the creation of flooring for houses and the common areas of residential and office buildings.  

Today, terrazzo is experiencing a revival as one of the key trends in contemporary architecture. Here, we will discuss the whats and hows of terrazzo and illustrate some of its uses in current projects. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 22 of 24
Nagasawa Coffee / ARII IRIE ARCHITECTS. Image © Kai Nakamura
Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 12 of 24
Yoga Studio / Kostas Chatzigiannis Architecture. Image © Joshua Tintner

Terrazzo offers a wide range of aesthetic options based on the size, type, and color of stones used in the mixture as well as the type of finish used (polished or washed).

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 5 of 24
Parisienne / Miriam Barrio Estudio. Image © Maria Pujol

Application

There are two kinds of finish for terrazzo: polished and washed (or "fulget") and both can be applied to any surface, no matter if it's flat or curved. Polished terrazzo is seen mainly in dry, indoor spaces while washed terrazzo is used for wet, outdoor spaces.  

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 10 of 24
La casa Carlton / Tom Robertson Architects. Image © Derek Swalwell

Fabrication

Terrazzo is a type of facing that is molded in situ or "on site." This means that it is applied immediately to the desired surface. This can present challenges since, once applied, it's impossible to correct any flaws in the base layer. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 15 of 24
Arquia / RipollTizon. Image

Composition

Terrazzo consists of a mortar made by mixing cement with ground marble. The mixture's exact composition depends on its use. For example, it's 50kg of cement to 80kg of marble for floors and 25:40:80 kg for walls (in this case lime is added). Color is added based on a project's specific requirements and it's possible to opt for different additives like sandstone, glass, and other stones. It's always a good idea to consult with suppliers about the properties of each mineral, especially regarding their resistance.  

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 14 of 24
Focal Length / RENESA Architecture Design Interiors Studio. Image © Suryan//Dang

Installation

On top of the precautions that should be taken when installing the majority of facings found on the market today (an incline between surfaces, surface roughness, base adherence, a surface's impact resistance, a slope in a wet area or the flatness of a dry area) you should also consider the different processes involved when applying terrazzo to either floors or walls.   

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 16 of 24
Apartamento Copan / Sabiá Arquitetos. Image © Pedro Vannucchi

Floors

  1. Prepare the level of concrete surface according to the finished floor, decreasing the thickness of the terrazzo in accordance with the granulometry of the mineral being used in the project. 
    1. Clean and wet the concrete surface. 
    2. Apply a wet 3-5cm layer of levelling consisting of washed coarse sand and cement. The proportions of the mixture should be 4:1kg. The resulting surface should be flat, compact, with no depressions or protrusions, and should have the necessary gradient. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 21 of 24
© Ambiente Familiar

Walls

  1. Clean and wet the plaster surface.
  2. Apply a wet 3-5cm layer of leveling consisting of washed coarse sand and cement. The proportions of the mixture should be 5:1kg. The resulting surface should be flat, compact, with no depressions or protrusions, and should have the necessary gradient. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 18 of 24
Focal Length / RENESA Architecture Design Interiors Studio. Image © Suryan//Dang

Installation Steps

  1. The surface should be washed and clean.
  2. Plastic or metallic terrazzo divider strips should be placed for each application, ensuring an even surface (the size of the dividing strips should be determined by the granulometry of the stones or the specific project requirements). 
  3. An important detail is that terrazzo facings should be applied using maximum 1.2 x 1.2m  panels, contained using rectangular dividers, made of brass, plastic, aluminum, or wood, that will be removed once the terrazzo is laid. It's a good idea to use a 1x1m modulation to ensure an even result for the facing. 
  4. After placing the dividers, the level layer should be wetted to ensure the facing's adherence to the base.  
  5. The terrazzo mortar will be applied and spread over the base. When the mixture has higher granulometry, the layer should be compressed using special tools or machines.
  6. Finally, the terrazzo mortar should be smoothed. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 20 of 24
Arquia / RipollTizon. Image

Finishes

Polished Finish

After letting the mixture dry (for 5 to 7 days), the first round of mechanical polishing can begin. Next, the floor should be cleaned completely to apply the stucco, correcting any flaws along the way. Wait another 2 days before removing the excess stucco. On top of this, it's necessary to do a final polishing, manual or mechanical depending on the project. For the resin application, the floor should be completely clean and dry. The estimated time to begin applying the resin is 5 to 7 days (acrylic resin) and 20 to 22 days (polyurethane resin) in order to let the cement dry and set.

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 13 of 24
Nutrisa / Cadena Concept Design. Image © The Raws

Washed Finish (Fulget)

After drying, the facing will be sponged to remove the excess cement. After 2 days, an acid wash should be applied to clean the stones on the surface.

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 24 of 24
Café cake and breakfast / Hotels Only. Image © Dmitrii Tsyrenshchikov

Maintenance and Care

Polished Terrazzo

Regular cleaning should be done with neutral detergents or soap powder. Never use bleach or other acids. The frequency of waxing will be determined by the use and traffic over the surface. After applying the wax, apply a sealant for better crystallization.  

Washed Terrazzo (Fulget)

Cleaning with a machine or other automated system should be done using settings that evenly disperse the cleaner. Never spot clean and use only neutral detergents or soap powder. Avoid using bleach or other acids. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 17 of 24
Apartamento EM / COA Assossiados. Image © Pedro Vannucchi

Important Observations

As we mentioned before, terrazzo is produced and installed using a completely handcrafted technique, meaning that, no matter how precise and careful the application, cracks and other imperfections are likely as well as uneven coloring in the rock and cement mixture. 

Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 23 of 24
Duca caffe & apericena / OHIO Estudio + Estudio Ripani. Image © Javier Agustín Rojas
Terrazzo is Back: Production, Installation, and Samples in Architecture - Image 19 of 24
La casa Carlton / Tom Robertson Architects. Image © Derek Swalwell

References

[1] "Technical Specifications for Terrazzo and Fulget", disponível em <https://casafranceza.com.br/granilite-e-fulget/>. Access May 14, 2019.

Image gallery

See allShow less
About this author
Cite: Migliani, Audrey. "Terrazzo is Back: Production, Installation, and Samples in Architecture" [O retorno do granilite na arquitetura: fabricação, instalação e exemplos notáveis] 20 Jun 2019. ArchDaily. (Trans. Johnson, Maggie) Accessed . <https://www.archdaily.com/918313/terrazzo-is-back-production-installation-and-samples-in-architecture> ISSN 0719-8884

You've started following your first account!

Did you know?

You'll now receive updates based on what you follow! Personalize your stream and start following your favorite authors, offices and users.