How to Design for Visual Comfort Using Natural Light

How to Design for Visual Comfort Using Natural Light

Architects are increasingly aware of our influence on the well-being and good health of the users of our projects. Natural lighting –and how it should be complemented with artificial lighting– is an essential factor to consider for the visual comfort of interior spaces. But, do we know how to handle it correctly?

The absence of discomfort at the time of seeing is not enough to measure the visual success of a space. Things like the rate of blinking, level of glare, or light blindness help to determine the environmental quality of a room. Other things that are vital to consider include representations of color, low reflection, and uniform distribution of light. People do well with clear views to the outside, so it’s also fundamental to perfect the quantity and location of the openings in the building envelope in order to control natural light intensity.

Both too little and too much light can cause visual discomfort. Important changes in light levels or sharp contrast (which is perceived as glare) can cause stress and fatigue as the human eye is permanently adapting to light levels. [1]

How to Design for Visual Comfort Using Natural Light - Image 10 of 14
Illustrations by Elisa Géhin. Image Courtesy of Saint-Gobain

Thus, everything that enters through our eyes influences the health of our body and mind, affecting our biological clock (sleep and wakefulness), our heart rate, the functioning of our organs, and our state of mind. The variable and dynamic nature of natural lighting is an opportunity for architecture to positively contribute to occupants' general well-being.

How to Design for Visual Comfort Using Natural Light - Image 13 of 14
Illustrations by Elisa Géhin. Image Courtesy of Saint-Gobain

Aspects to Consider When Designing for Visual Comfort

Always prioritize natural light

Natural light will always be the most comfortable for human beings since it is the source of illumination to which our eyes adapt naturally. Not only does it have a proven impact on health and well-being –increasing awareness during daytime, improving sleep patterns, decreasing depression risks, among many others–, but also generates enormous energy savings, avoiding the reiterated use of artificial light.

When designing a new project, take full advantage of the orientation of the site and provide users with the best natural light possible through the correct design of openings. Depending on the specific use of each room, one should also consider a space’s variation of use at different moments or days.

How to Design for Visual Comfort Using Natural Light - Image 2 of 14
Maison Kochi / Meister Varma Architects. Image © Praveen Mohandas

Map the distribution of light, independent of the observer: Illuminance and Luminance

Illuminance, expressed in lux, is the luminous power that comes from all directions and reaches a given point, where a specific task will be performed. [1] When measuring it on a certain surface, for example on a desk in offices, ensure that the illuminance reaches 500 lux. Values very inferior or superior to that generate discomfort. This is valid for artificial lighting in offices, at workplace level, however, in order to take into account the natural variability of daylight, it is better to refer to the new European Standard on Daylighting, briefly explained below.

How to Design for Visual Comfort Using Natural Light - Image 14 of 14
Illustrations by Elisa Géhin. Image Courtesy of Saint-Gobain

The Luminance, expressed in candela per square meter (cd/m2), corresponds to the different luminous intensities per unit area, emitted or reflected by the light sources and the surfaces that surround us. [1] It basically describes the brightness of light, from the point of view of visual perceptions and psychological sensations. By measuring it we can identify the contrasts of light and glare, and understand if the light is evenly distributed or if it comes from a specific source.

In both cases a Photometer must be used. To measure the Illuminance (lx) it’s called Lux Meter, and to measure Luminance (cd/m2) it’s known as Luminance Meter.

How to Design for Visual Comfort Using Natural Light - Image 6 of 14
© Hey!Cheese

Evaluate the quantity and quality of light

To evaluate the quantity of light, the distribution of light in space and the Illuminance should be measured at specific and relevant points for the functions that will be carried out in the room.

In order to evaluate the quality of the light, the Useful Daylight Illuminance (UDI) must be modeled first, which integrates the evaluation of the daylight levels and the glare, setting as an acceptable range the values that move between 100 and 2000 lux. [2] The Daylight Autonomy (DA) must then be calculated, which is the percentage of annual daytime hours in which a specific point in a space is maintained above a certain level of illumination, set by the user. The new European Standard for Daylighting EN17037 states that the following criterias should be met (minimum requirements for Spatial Daylight Autonomy): illuminance of 300 lux over 50% of space during more than half of daylit hours and illuminance of 100 lux for 100% of space more than half of the daylit hours.

How to Design for Visual Comfort Using Natural Light - Image 8 of 14
Atelier_142 / Atelier Wilda. Image © David Foessel
How to Design for Visual Comfort Using Natural Light - Image 11 of 14
Illustrations by Elisa Géhin. Image Courtesy of Saint-Gobain

Daylight autonomy is determined by location, orientation, windows shade and position as well as Window-to-floor ratio and Visible Light Transmission of the glazing. The following aspects are fundamental to achieve an effective balance between all these variables:

Consider the relationship between openings and space: Window-to-Floor Ratio

The calculation of the relation between the area of ​​the openings and the area of ​​the space is called Window-to-Floor Ratio (WFR) and is obtained by dividing the total area of ​​the openings by the total area of ​​the space associated with them. This factor helps define the number of openings that will work effectively in each space of our project. It can also guide things like the openings' size, location, and type of glazing. In some countries, like France, it is mandatory to have at least a WFR of 17% for all new residential buildings.

The WFR value must be multiplied by the value of the Visible Light Transmission of the chosen glass (VLT), explained below, to ensure that the design moves within the thresholds that ensure certain effective levels of visual comfort (usually a value above 0.15).

How to Design for Visual Comfort Using Natural Light - Image 4 of 14
Scheune Minden / Architekten Stein Hemmes Wirtz. Image © Linda Blatzek Photography

Decide the amount of light that must pass through the glass: Visible Light Transmission

As described above, the relationship between the openings and the space must be complemented with the Visible Light Transmission (VLT), which corresponds to the amount of visible light that passes through the glass. Glass with VLT of 50% allows 50 percent of light through and blocks the remaining 50 percent. With this, we can decide to incorporate large openings in our project and at the same time control the amount of light that passes through it, while also adding protection against UV rays and glare.

How to Design for Visual Comfort Using Natural Light - Image 5 of 14
‘Hope’ Lavan’s Studio Apartment / MMGS ARCHITECTS. Image © Ramitha Watareka

To achieve effective results, all of these analyses must be added to the calculation of other relevant factors, such as the solar heat gain coefficient and the U-Value. One must take local regulations into consideration, as well as the technical specifications of the types of windows chosen.

In addition, it's essential to evaluate the views towards the outside, integrating qualitative factors such as the urban or natural landscape, or other elements that could be observed from each transparent surface. Consider the incorporation of solar control systems or other methods that influence visual comfort of the interiors of the architecture project.

How to Design for Visual Comfort Using Natural Light - Image 9 of 14
Cardamom Club / Kumar La Noce. Image © Vivek Muthuramalingam
How to Design for Visual Comfort Using Natural Light - Image 12 of 14
Illustrations by Elisa Géhin. Image Courtesy of Saint-Gobain

Find more details in the Comic Book video, and on the Saint-Gobain website.

  • [1] Indoor Environment And Well-Being. The Saint-Gobain Building Science Handbook.
  • [2] Useful Daylight Illuminance (UDI) / Daylighting Pattern Guide. <https://patternguide.advancedbuildings.net/using-this-guide/analysis-methods/useful-daylight-illuminance> (accessed February 2019).
  • [3] Daylight Autonomy (DA) / Daylighting Pattern Guide. <https://patternguide.advancedbuildings.net/using-this-guide/analysis-methods/daylight-autonomy> (accessed February 2019).

About this author
Cite: José Tomás Franco. "How to Design for Visual Comfort Using Natural Light" 20 Mar 2019. ArchDaily. Accessed . <https://www.archdaily.com/911210/let-there-be-light-key-indicators-to-describe-and-design-visual-comfort> ISSN 0719-8884

Atelier_142 / Atelier Wilda. Image © David Foessel

如何从舒适度上设计“光”,避免视觉光陷阱?

You've started following your first account!

Did you know?

You'll now receive updates based on what you follow! Personalize your stream and start following your favorite authors, offices and users.